You will receive everything listed below:
- 2 year warranty on all parts
- Stand and base with electronic controller
- High powered CREE technology LED floodlight you can drill and install into your press OR free mount where you’d like. It plugs into your directly into the control box.
- .223 Bullet Disc and and custon "The Silver Layer" .223 slide adjuster and sensor block adapter(Color varies).
- 9mm Bullet Disc and sensor tube (Color varies)
- .40 cal Bullet Disc and sensor tube (Color varies)
- .45 cal Bullet Disc and sensor tube (Color varies)
- 12VDC Power Supply
- Vinyl Feed tube (Large and Small)
- Quick-Disconnect for each disc
 
UPDATE: Yes, After extensive testing, This bullet feeder also feeds .30, .308, 30-06, 357 & .358 calibers with minimal adjustment using the included discs.
 
- 9mm Brass Disc (Color varies)
- .40 cal Brass Disc (Color varies)
- .45 cal Brass Disc (Color varies)
- LEE APP single case feed adapter(Bolts into existing APP mount) 
- Feed tube and adapter/reducer for 9mm
 
If your press accepts a feed tube, this machine will adapt to it, guaranteed. If you're mildly handy, you can adapt this machine to ANY progressive reloading setup using dropper or feeder dies and save yourself some serious money! 
 
I recommend the LEE bullet dropper dies, as they're cheap, Steel, and proven to work well with these setups. 
 
Does not include .223 Brass case feeder capability. 
 
Bullet feeder also feeds .30, .308, 30-06, 357 & .358 calibers with minimal adjustment using the included discs.  
 
Extra components can be purchased separately, just contact me.
 
Bullets and cases are fed in the "mouth up" and “nose up” configuration respectively. 
 
Original design by @ANDREWROK. This design has been heavily modified for improved operation and increased reliablilty by The Silver Layer LLC. Built and distributed commercially under creativecommons.org "BY" terms: https://creativecommons.org/licenses/by/4.0/